Dave Weinman from Frederick County (MD) sent in this photo and description of their “force bag.” The bag becomes a one stop shop for both destructive combat forcible entry operations and routine through the lock and non-emergency entry operations. They routinely grab the force bag and the irons (they use the popular 8lb force axe and a tuned up pro bar) or a rotary saw, resulting in very few doors that they are not able to defeat.
The kit consists of a Hydra-Ram and its standard bag with the pictured tools added to perform a number of different operations. In addition to the Hydra-Ram and mallet, (which may or may not be necessary when carrying the irons) they have included the following tools: a modified channel lock tool with key tools in the handles for the removal of rim locks, a K tool in case the rim lock needs some extra encouragement, an additional key tool to take care of the stem hole or recessed latch like those found on Adams Rite commercial locks. For less fortified doors they have also included: a bucket handle tool for the opening of double glass doors with push bar openers, and a shove knife for making quick work of unsecured knob locks. A vice grip with chain is also included for lock cutting operations, or door control. The bag is finished out with wood wedges for capturing progress during one man forcible entry or for securing open a forced door.
The bag is fairly comprehensive and addresses the common forcible entry needs they have identified in their first due area. The strapped carry bag slung over the shoulder allows the member assigned to FE to carry the irons in one hand while maintaining.