Archive for July, 2015

Carrying Tools

We have always been advocates of riding assignments and tool assignments. It’s one of the easiest ways to improve your company’s efficiency and effectiveness on the fireground. Even if your department doesn’t believe in tool assignments, you probably find yourself carrying the same tools on most occasions. How much thought have you put into how you carry your tools? Do you carry them the same way every time? Are you truly maximizing how you carry them, and making it easier on yourself?

Below are some photos of an efficient method of carrying the tools assigned to the outside team on the Truck Company. In these photos you’ll see that the firefighter is carrying the most often needed tools for the outside team: ladder, hook, halligan, light, TIC, and saw.

Below is a photo of a tool assignment for a residential structure. You’ll notice this method allows for a “free hand” to utilize a TIC for additional recon. The TIC is extremely helpful for the outside team to read the building and determine the fires location if its not already vented from a window.


Below are photos of a tool assignment for a commercial structure. In this case the “free hand” is taken up carrying the saw. The TIC is still available for recon since its clipped on the air pack, but obviously the saw would need to be lowered to the ground first.



The trick with this particular carry method is how the halligan and hook are laid inside the beam of the ladder. This allows one hand to “clamp” the tools to the ladder, and essentially allows you to carry three tools in one hand. The beauty of this method is that once you get to the area where the ladder will be deployed, the hook and halligan can easily be dropped without fumbling around. Allowing the ladder to be thrown from the carry position without being lowered to the ground. Dropping the tools in the area of where the butt of the ladder will be once the ladder is in position will prevent you losing them in high grass situations. Keep in mind that the utilization of straps or clips to secure the tool would make this option a little more time consuming.

It is worth mentioning that this method works best with ladders that are stored on beam. This allows you to partially remove the ladder, place your tools on the inside of the beam, and then get your shoulder in position before taking on the weight of the ladder. Specifying your rig correctly also increases your fireground efficiency, but we’ll get into those specifics in a future post.


Even if this is not your choice of tools for your assignment, take the time to come up with the most efficient way to carry your tools. Keep in mind that having a free hand whenever possible gives you the most versatility for the unexpected situation or occasional need for a specific tool. We’d love to see (and show off) some of your tool carrying setups, email us at with some photos and details.